【ICLR 2025】MogaNet: 高效多阶门控聚合网络_行业动态

【ICLR 2025】MogaNet: 高效多阶门控聚合网络

发布时间：2025-07-31 10:10

发布者：网络

浏览次数：

MogaNet是高效多阶门控聚合网络，属纯卷积架构。其通过SMixer和CMixer模块，在空间和通道交互中促进多阶交互并情境化，平衡复杂度与性能。在ImageNet分类等任务表现优异，轻量版MogaNet-T以1.44G FLOPs达80.0%精度，超ParC-Net-S且节省59% FLOPs。代码复现含各组件及训练过程，实验验证了其有效性。

☞☞☞AI 智能聊天, 问答助手, AI 智能搜索, 免费无限量使用 DeepSeek R1 模型☜☜☜

【iclr 2024】moganet: 高效多阶门控聚合网络 -

MogaNet: 高效多阶门控聚合网络

摘要

自从Vision Transformers（ViT）取得成功以来，对Transformers架构的探索也引发了现代ConvNets的复兴。在这项工作中，通过交互复杂性的角度来探索DNN的表示能力。经验表明，交互复杂性是视觉识别的一个容易被忽视但又必不可少的指标。因此，本文作者提出了一个新的高效ConvNet系列，名为MogaNet，以在基于ConvNet的纯模型中进行信息上下文挖掘，并在复杂度和性能方面进行了更好的权衡。在MogaNet中，通过在空间和通道交互空间中利用两个专门设计的聚合模块，促进了跨多个复杂性的交互并将其情境化。本文对ImageNet分类、COCO目标检测和ADE20K语义分割任务进行了广泛的研究。实验结果表明，MogaNet在主流场景和所有模型规模中建立了比其他流行方法更先进的新SOTA。通常，轻量级的MogaNet-T通过在ImageNet-1K上进行精确的训练设置，以1.44G的FLOPs实现80.0%的top-1精度，超过ParC-Net-S 1.4%的精度，但节省了59%（2.04G）的FLOPs。

1. MagaNet

现有方法仍然存在一个表示瓶颈:自注意力或大核卷积的朴素实现阻碍了区分性上下文信息和全局交互的建模，导致DNN与人类视觉系统之间的认知差距。为此本文从特征交互复杂性的角度提出了一种纯卷积架构MogaNet。MogaNet采用类似金字塔式ViT的架构，包括两个模块：SMixer和CMixer 【ICLR 2024】MogaNet: 高效多阶门控聚合网络 -

1.1 SMixer

SMixer主要包括两个模块：特征分解（FD）和多阶门控聚合（Multi-Order Gated Aggregation）

为了强迫网络关注多阶交互，本文提出了FD模块，动态地排除不重要的交互（Patch自身的0阶交互【Conv2D 1 * 1】和覆盖所有Patch的n阶交互【GAP】），详细操作如下公式所示：

$\begin{matrix} Y =_{1 \times 1} (X) \\ Z = GELU (Y + γ_{s} ⊙ (Y - GAP (Y))) \end{matrix}$ Y=Conv1×1(X)Z=GELU(Y+γs⊙(Y−GAP(Y)))

Motiff妙多

Motiff妙多是一款AI驱动的界面设计工具，定位为“AI时代设计工具”

334 查看详情 Motiff妙多

Multi-Order Gated Aggregation

多阶门控聚合包含两个分支：聚合分支和上下文分支，聚合分支负责生成门控权重，上下文分支通过不同核大小和不同空洞大小的卷积进行多尺度的特征提取，从而捕获上下文多阶交互。值得注意的是，两个分支的输出使用SiLU激活函数（SILU既具有Sigmoid门控效应，又具有稳定的训练特性）。公式表示为：

$Z = \underset{F_{ϕ}}{\underset{⏟}{SiLU (_{1 \times 1} (X))}} ⊙ \underset{G_{ψ}}{\underset{⏟}{SiLU (_{1 \times 1} (Y_{C}))}}$ Z=FϕSiLU(Conv1×1(X))⊙GψSiLU(Conv1×1(YC))

【ICLR 2024】MogaNet: 高效多阶门控聚合网络 -

1.2 CMixer

传统的FFN会导致大量的特征冗余，降低效率，本文提出了一种新的通道聚合模块以重分配多阶特征，通道聚合与FD操作类似，具体公式如下所示：

$\begin{matrix} Y & = GELU (_{3 \times 3} (_{1 \times 1} (Norm (X)))) \\ Z & =_{1 \times 1} (CA (Y)) + X \\ C A (X) & = X + γ_{c} ⊙ (X - GELU (X W_{r})) \end{matrix}$ YZCA(X)=GELU(DW3×3(Conv1×1(Norm(X))))=Conv1×1(CA(Y))+X=X+γc⊙(X−GELU(XWr))

【ICLR 2024】MogaNet: 高效多阶门控聚合网络 -

2. 代码复现

2.1 下载并导入所需的库

In [ ]

!pip install paddlex

In [ ]

%matplotlib inlineimport paddleimport paddle.fluid as fluidimport numpy as npimport matplotlib.pyplot as pltfrom paddle.vision.datasets import Cifar10from paddle.vision.transforms import Transposefrom paddle.io import Dataset, DataLoaderfrom paddle import nnimport paddle.nn.functional as Fimport paddle.vision.transforms as transformsimport osimport matplotlib.pyplot as pltfrom matplotlib.pyplot import figureimport paddlex

2.2 创建数据集

In [3]

train_tfm = transforms.Compose([
    transforms.RandomResizedCrop(224),
    transforms.ColorJitter(brightness=0.2,contrast=0.2, saturation=0.2),
    transforms.RandomHorizontalFlip(0.5),
    transforms.RandomRotation(20),
    paddlex.transforms.MixupImage(),
    transforms.ToTensor(),
    transforms.Normalize(mean=(0.485, 0.456, 0.406), std=(0.229, 0.224, 0.225)),
])

test_tfm = transforms.Compose([
    transforms.Resize((224, 224)),
    transforms.ToTensor(),
    transforms.Normalize(mean=(0.485, 0.456, 0.406), std=(0.229, 0.224, 0.225)),
])

In [4]

paddle.vision.set_image_backend('cv2')# 使用Cifar10数据集train_dataset = Cifar10(data_file='data/data152754/cifar-10-python.tar.gz', mode='train', transform = train_tfm, )
val_dataset = Cifar10(data_file='data/data152754/cifar-10-python.tar.gz', mode='test',transform = test_tfm)print("train_dataset: %d" % len(train_dataset))print("val_dataset: %d" % len(val_dataset))

train_dataset: 50000
val_dataset: 10000

In [5]

batch_size=128

In [6]

train_loader = DataLoader(train_dataset, batch_size=batch_size, shuffle=True, drop_last=True, num_workers=4)
val_loader = DataLoader(val_dataset, batch_size=batch_size, shuffle=False, drop_last=False, num_workers=4)

2.3 标签平滑

In [7]

class LabelSmoothingCrossEntropy(nn.Layer):
    def __init__(self, smoothing=0.1):
        super().__init__()
        self.smoothing = smoothing    def forward(self, pred, target):

        confidence = 1. - self.smoothing
        log_probs = F.log_softmax(pred, axis=-1)
        idx = paddle.stack([paddle.arange(log_probs.shape[0]), target], axis=1)
        nll_loss = paddle.gather_nd(-log_probs, index=idx)
        smooth_loss = paddle.mean(-log_probs, axis=-1)
        loss = confidence * nll_loss + self.smoothing * smooth_loss        return loss.mean()

2.4 DropPath

In [8]

def drop_path(x, drop_prob=0.0, training=False):
    """
    Drop paths (Stochastic Depth) per sample (when applied in main path of residual blocks).
    the original name is misleading as 'Drop Connect' is a different form of dropout in a separate paper...
    See discussion: https://github.com/tensorflow/tpu/issues/494#issuecomment-532968956 ...
    """
    if drop_prob == 0.0 or not training:        return x
    keep_prob = paddle.to_tensor(1 - drop_prob)
    shape = (paddle.shape(x)[0],) + (1,) * (x.ndim - 1)
    random_tensor = keep_prob + paddle.rand(shape, dtype=x.dtype)
    random_tensor = paddle.floor(random_tensor)  # binarize
    output = x.divide(keep_prob) * random_tensor    return outputclass DropPath(nn.Layer):
    def __init__(self, drop_prob=None):
        super(DropPath, self).__init__()
        self.drop_prob = drop_prob    def forward(self, x):
        return drop_path(x, self.drop_prob, self.training)

2.5 模型的创建

In [9]

class ElementScale(nn.Layer):
    """A learnable element-wise scaler."""

    def __init__(self, embed_dims, init_value=0.):
        super().__init__()
        self.scale =self.create_parameter((1, embed_dims, 1, 1),
            default_initializer=nn.initializer.Constant(init_value))    def forward(self, x):
        return x * self.scale

2.5.1 CMixer

In [10]

class ChannelAggregationFFN(nn.Layer):
    def __init__(self, embed_dims, feedforward_channels, kernel_size=3, act_fuc=nn.GELU, ffn_drop=0.):
        super().__init__()

        self.fc1 = nn.Conv2D(embed_dims, feedforward_channels, 1)
        self.dwconv = nn.Conv2D(feedforward_channels, feedforward_channels, kernel_size, padding=kernel_size // 2, groups= feedforward_channels)
        self.fc2 = nn.Conv2D(feedforward_channels, embed_dims, 1)
        self.act = act_fuc()
        self.drop = nn.Dropout(ffn_drop)
        self.decompose = nn.Conv2D(feedforward_channels, 1, 1)
        self.sigma = ElementScale(feedforward_channels, init_value=1e-5)    def forward(self, x):
        x = self.fc1(x)
        x = self.dwconv(x)
        x = self.act(x)
        x = self.drop(x)
        decompose = self.decompose(x)
        decompose = self.act(x)
        x = x + self.sigma(x - decompose)
        x = self.fc2(x)
        x = self.drop(x)        return x

2.5.2 SMixer

In [11]

class MultiOrderDWConv(nn.Layer):
    def __init__(self, embed_dims, dw_dilation=[1, 2, 3], channel_split=[1, 3, 4]):
        super().__init__()
        self.split_ratio = [i / sum(channel_split) for i in channel_split]
        self.embed_dims = embed_dims
        self.embed_dims_1 = int(embed_dims * self.split_ratio[1])
        self.embed_dims_2 = int(embed_dims * self.split_ratio[2])
        self.embed_dims_0 = embed_dims - self.embed_dims_1 - self.embed_dims_2        assert len(dw_dilation) == len(channel_split) == 3
        assert 1 <= min(dw_dilation) and max(dw_dilation) <= 3
        assert embed_dims % sum(channel_split) == 0

        self.dwconv0 = nn.Conv2D(embed_dims, embed_dims, 5, padding=(1 + 4 * dw_dilation[0]) // 2,
                            groups=embed_dims, dilation=dw_dilation[0])

        self.dwconv1 = nn.Conv2D(self.embed_dims_1, self.embed_dims_1, 5, padding=(1 + 4 * dw_dilation[1]) // 2,
                            groups=self.embed_dims_1, dilation=dw_dilation[1])

        self.dwconv2 = nn.Conv2D(self.embed_dims_2, self.embed_dims_2, 7, padding=(1 + 6 * dw_dilation[2]) // 2,
                            groups=self.embed_dims_2, dilation=dw_dilation[2])

        self.pwconv = nn.Conv2D(embed_dims, embed_dims, 1)    def forward(self, x):
        x = self.dwconv0(x)
        x_1 = self.dwconv1(x[:, self.embed_dims_0:self.embed_dims_0 + self.embed_dims_1, ...])
        x_2 = self.dwconv2(x[:, self.embed_dims - self.embed_dims_2:, ...])
        x_0 = x[:, :self.embed_dims_0, ...]
        x = paddle.concat([x_0, x_1, x_2], axis=1)
        x = self.pwconv(x)        return x

In [12]

class MultiOrderGatedAggregation(nn.Layer):
    def __init__(self, embed_dims, attn_dw_dilation=[1, 2, 3], attn_channel_split=[1, 3, 4], attn_act_fuc=nn.Silu):
        super().__init__()

        self.proj1 = nn.Conv2D(embed_dims, embed_dims, 1)
        self.gate = nn.Conv2D(embed_dims, embed_dims, 1)
        self.value = MultiOrderDWConv(embed_dims, attn_dw_dilation, attn_channel_split)
        self.proj2 = nn.Conv2D(embed_dims, embed_dims, 1)
        self.gate_act = attn_act_fuc()
        self.value_act = attn_act_fuc()
        self.act = attn_act_fuc()
        self.sigma = ElementScale(embed_dims, 1e-5)    def forward(self, x):
        shortcut = x
        x = self.proj1(x)
        x = self.sigma(x - paddle.mean(x, axis=[-1, -2], keepdim=True)) + x
        x = self.act(x)
        x = self.gate_act(self.gate(x)) * self.value_act(self.value(x))
        x = self.proj2(x)
        x = x + shortcut        return x

2.5.3 MogaBlock

In [13]

class MogaBlock(nn.Layer):
    def __init__(self, embed_dims, ffn_ratio=4., drop_rate=0., drop_path_rate=0., act_fuc=nn.GELU, norm=nn.BatchNorm2D,
                 init_value=1e-5, attn_dw_dilation=[1, 2, 3], attn_channel_split=[1, 3, 4], attn_act_fuc=nn.Silu):
        super().__init__()

        self.norm1 = norm(embed_dims)
        self.attn = MultiOrderGatedAggregation(embed_dims, attn_dw_dilation, attn_channel_split, attn_act_fuc)
        self.norm2 = norm(embed_dims)
        self.ffn = ChannelAggregationFFN(embed_dims, int(embed_dims * ffn_ratio), act_fuc=act_fuc, ffn_drop=drop_rate)
        self.drop_path = DropPath(drop_path_rate) if drop_path_rate > 0. else nn.Identity()

        self.layer_scales1 = self.create_parameter((1, embed_dims, 1, 1), default_initializer=nn.initializer.Constant(init_value))
        self.layer_scales2 = self.create_parameter((1, embed_dims, 1, 1), default_initializer=nn.initializer.Constant(init_value))    def forward(self, x):
        x = x + self.drop_path(self.layer_scales1 * self.attn(self.norm1(x)))
        x = x + self.drop_path(self.layer_scales2 * self.ffn(self.norm2(x)))        return x

In [14]

class ConvPatchEmbed(nn.Layer):
    def __init__(self, in_channels, embed_dims, kernel_size=3, stride=2, norm=nn.BatchNorm2D):
        super().__init__()

        self.proj = nn.Conv2D(in_channels, embed_dims, kernel_size, padding=kernel_size // 2, stride=stride)
        self.norm = norm(embed_dims)    def forward(self, x):
        x = self.proj(x)
        x = self.norm(x)        return x, (x.shape[-2], x.shape[-1])

In [15]

class StackConvPatchEmbed(nn.Layer):    # Stem
    def __init__(self, in_channels, embed_dims, kernel_size=3, stride=2, act_fuc=nn.GELU, norm=nn.BatchNorm2D):
        super().__init__()

        self.proj = nn.Sequential(
            nn.Conv2D(in_channels, embed_dims // 2, kernel_size, padding=kernel_size // 2, stride=stride),
            norm(embed_dims // 2),
            act_fuc(),
            nn.Conv2D(embed_dims // 2, embed_dims, kernel_size, padding=kernel_size // 2, stride=stride),
        )
        self.norm = norm(embed_dims)    def forward(self, x):
        x = self.proj(x)
        x = self.norm(x)        return x, (x.shape[-2], x.shape[-1])

2.5.4 MogaNet

In [16]

class MogaNet(nn.Layer):
    arch_zoo = {
    **dict.fromkeys(['xt', 'x-tiny', 'xtiny'],
                    {'embed_dims': [32, 64, 96, 192],                        'depths': [3, 3, 10, 2],                        'ffn_ratios': [8, 8, 4, 4]}),
    **dict.fromkeys(['t', 'tiny'],
                    {'embed_dims': [32, 64, 128, 256],                        'depths': [3, 3, 12, 2],                        'ffn_ratios': [8, 8, 4, 4]}),
    **dict.fromkeys(['s', 'small'],
                    {'embed_dims': [64, 128, 320, 512],                        'depths': [2, 3, 12, 2],                        'ffn_ratios': [8, 8, 4, 4]}),
    **dict.fromkeys(['b', 'base'],
                    {'embed_dims': [64, 160, 320, 512],                        'depths': [4, 6, 22, 3],                        'ffn_ratios': [8, 8, 4, 4]}),
    **dict.fromkeys(['l', 'large'],
                    {'embed_dims': [64, 160, 320, 640],                        'depths': [4, 6, 44, 4],                        'ffn_ratios': [8, 8, 4, 4]}),
    **dict.fromkeys(['xl', 'x-large', 'xlarge'],
                    {'embed_dims': [96, 192, 480, 960],                        'depths': [6, 6, 44, 4],                        'ffn_ratios': [8, 8, 4, 4]}),
}    def __init__(self, arch='tiny', in_channels=3, num_classes=1000, drop_rate=0., drop_path_rate=0., init_value=1e-5,
                 patch_sizes=[3, 3, 3, 3], stem_norm=nn.BatchNorm2D, conv_norm=nn.BatchNorm2D,
                 patchembed_types=['ConvEmbed', 'Conv', 'Conv', 'Conv',], attn_dw_dilation=[1, 2, 3],
                 attn_channel_split=[1, 3, 4], attn_act_fuc=nn.Silu, attn_final_dilation=True):
        super().__init__()        if isinstance(arch, str):
            arch = arch.lower()            assert arch in set(self.arch_zoo), \                f'Arch {arch} is not in default archs {set(self.arch_zoo)}'
            self.arch_settings = self.arch_zoo[arch]        else:
            essential_keys = {'embed_dims', 'depths', 'ffn_ratios'}            assert isinstance(arch, dict) and set(arch) == essential_keys, \                f'Custom arch needs a dict with keys {essential_keys}'
            self.arch_settings = arch

        self.embed_dims = self.arch_settings['embed_dims']
        self.depths = self.arch_settings['depths']
        self.ffn_ratios = self.arch_settings['ffn_ratios']
        self.num_stages = len(self.depths)
        self.use_layer_norm = isinstance(stem_norm, nn.LayerNorm)        assert len(patchembed_types) == self.num_stages

        total_depth = sum(self.depths)
        dpr = [
            x.item() for x in paddle.linspace(0, drop_path_rate, total_depth)
        ]  # stochastic depth decay rule

        cur_block_idx = 0
        for i, depth in enumerate(self.depths):            if i == 0 and patchembed_types[i] == "ConvEmbed":                assert patch_sizes[i] <= 3
                patch_embed = StackConvPatchEmbed(
                    in_channels=in_channels,
                    embed_dims=self.embed_dims[i],
                    kernel_size=patch_sizes[i],
                    stride=patch_sizes[i] // 2 + 1,
                    act_fuc=nn.GELU,
                    norm=conv_norm,
                )            else:
                patch_embed = ConvPatchEmbed(
                    in_channels=in_channels if i == 0 else self.embed_dims[i - 1],
                    embed_dims=self.embed_dims[i],
                    kernel_size=patch_sizes[i],
                    stride=patch_sizes[i] // 2 + 1,
                    norm=conv_norm)            if i == self.num_stages - 1 and not attn_final_dilation:
                attn_dw_dilation = [1, 2, 1]
            blocks = nn.LayerList([
                MogaBlock(
                    embed_dims=self.embed_dims[i],
                    ffn_ratio=self.ffn_ratios[i],
                    drop_rate=drop_rate,
                    drop_path_rate=dpr[cur_block_idx + j],
                    norm=conv_norm,
                    init_value=init_value,
                    attn_dw_dilation=attn_dw_dilation,
                    attn_channel_split=attn_channel_split,
                    attn_act_fuc=attn_act_fuc
                ) for j in range(depth)
            ])
            cur_block_idx += depth
            norm = stem_norm(self.embed_dims[i])

            self.add_sublayer(f'patch_embed{i + 1}', patch_embed)
            self.add_sublayer(f'blocks{i + 1}', blocks)
            self.add_sublayer(f'norm{i + 1}', norm)        # Classifier head
        self.num_classes = num_classes
        self.head = nn.Linear(self.embed_dims[-1], num_classes) \            if num_classes > 0 else nn.Identity()        # init for classification
        self.apply(self._init_weights)    def _init_weights(self, m):
        tn = nn.initializer.TruncatedNormal(std=.02)
        kaiming = nn.initializer.KaimingNormal()
        zeros = nn.initializer.Constant(0.)
        ones = nn.initializer.Constant(1.)        if isinstance(m, nn.Linear):
            tn(m.weight)            if isinstance(m, nn.Linear) and m.bias is not None:
                zeros(m.bias)        elif isinstance(m, (nn.Conv1D, nn.Conv2D)):
            kaiming(m.weight)            if m.bias is not None:
                zeros(m.bias)        elif isinstance(m, (nn.LayerNorm, nn.BatchNorm2D)):
            zeros(m.bias)
            ones(m.weight)    def forward(self, x):

        for i in range(self.num_stages):
            patch_embed = getattr(self, f'patch_embed{i + 1}')
            blocks = getattr(self, f'blocks{i + 1}')
            norm = getattr(self, f'norm{i + 1}')

            x, hw_shape = patch_embed(x)            for block in blocks:
                x = block(x)            if self.use_layer_norm:
                x = x.flatten(2).transpose([0, 2, 1])
                x = norm(x)
                x = x.reshape(-1, *hw_shape,
                            block.out_channels).transpose([0, 3, 1, 2])            else:
                x = norm(x)

        x = self.head(x.mean(axis=[2, 3]))        return x

2.5.5 模型参数

In [ ]

model = MogaNet(arch='xt', num_classes=10)
paddle.summary(model, (1, 3, 224, 224))

【ICLR 2024】MogaNet: 高效多阶门控聚合网络 -

In [ ]

model = MogaNet(arch='t', num_classes=10)
paddle.summary(model, (1, 3, 224, 224))

【ICLR 2024】MogaNet: 高效多阶门控聚合网络 -

In [ ]

model = MogaNet(arch='s', num_classes=10)
paddle.summary(model, (1, 3, 224, 224))

【ICLR 2024】MogaNet: 高效多阶门控聚合网络 -

In [ ]

model = MogaNet(arch='b', num_classes=10)
paddle.summary(model, (1, 3, 224, 224))

【ICLR 2024】MogaNet: 高效多阶门控聚合网络 -

In [ ]

model = MogaNet(arch='l', num_classes=10)
paddle.summary(model, (1, 3, 224, 224))

【ICLR 2024】MogaNet: 高效多阶门控聚合网络 -

In [ ]

model = MogaNet(arch='xl', num_classes=10)
paddle.summary(model, (1, 3, 224, 224))

【ICLR 2024】MogaNet: 高效多阶门控聚合网络 -

2.6 训练

In [23]

learning_rate = 0.001n_epochs = 100paddle.seed(42)
np.random.seed(42)

In [ ]

work_path = 'work/model'# MogaNet-xtmodel = MogaNet(arch='xt', num_classes=10)

criterion = LabelSmoothingCrossEntropy()

scheduler = paddle.optimizer.lr.CosineAnnealingDecay(learning_rate=learning_rate, T_max=50000 // batch_size * n_epochs, verbose=False)
optimizer = paddle.optimizer.Adam(parameters=model.parameters(), learning_rate=scheduler, weight_decay=1e-5)

gate = 0.0threshold = 0.0best_acc = 0.0val_acc = 0.0loss_record = {'train': {'loss': [], 'iter': []}, 'val': {'loss': [], 'iter': []}}   # for recording lossacc_record = {'train': {'acc': [], 'iter': []}, 'val': {'acc': [], 'iter': []}}      # for recording accuracyloss_iter = 0acc_iter = 0for epoch in range(n_epochs):    # ---------- Training ----------
    model.train()
    train_num = 0.0
    train_loss = 0.0

    val_num = 0.0
    val_loss = 0.0
    accuracy_manager = paddle.metric.Accuracy()
    val_accuracy_manager = paddle.metric.Accuracy()    print("#===epoch: {}, lr={:.10f}===#".format(epoch, optimizer.get_lr()))    for batch_id, data in enumerate(train_loader):
        x_data, y_data = data
        labels = paddle.unsqueeze(y_data, axis=1)

        logits = model(x_data)

        loss = criterion(logits, y_data)

        acc = paddle.metric.accuracy(logits, labels)
        accuracy_manager.update(acc)        if batch_id % 10 == 0:
            loss_record['train']['loss'].append(loss.numpy())
            loss_record['train']['iter'].append(loss_iter)
            loss_iter += 1

        loss.backward()

        optimizer.step()
        scheduler.step()
        optimizer.clear_grad()

        train_loss += loss
        train_num += len(y_data)

    total_train_loss = (train_loss / train_num) * batch_size
    train_acc = accuracy_manager.accumulate()
    acc_record['train']['acc'].append(train_acc)
    acc_record['train']['iter'].append(acc_iter)
    acc_iter += 1
    # Print the information.
    print("#===epoch: {}, train loss is: {}, train acc is: {:2.2f}%===#".format(epoch, total_train_loss.numpy(), train_acc*100))    # ---------- Validation ----------
    model.eval()    for batch_id, data in enumerate(val_loader):

        x_data, y_data = data
        labels = paddle.unsqueeze(y_data, axis=1)        with paddle.no_grad():
          logits = model(x_data)

        loss = criterion(logits, y_data)

        acc = paddle.metric.accuracy(logits, labels)
        val_accuracy_manager.update(acc)

        val_loss += loss
        val_num += len(y_data)

    total_val_loss = (val_loss / val_num) * batch_size
    loss_record['val']['loss'].append(total_val_loss.numpy())
    loss_record['val']['iter'].append(loss_iter)
    val_acc = val_accuracy_manager.accumulate()
    acc_record['val']['acc'].append(val_acc)
    acc_record['val']['iter'].append(acc_iter)    print("#===epoch: {}, val loss is: {}, val acc is: {:2.2f}%===#".format(epoch, total_val_loss.numpy(), val_acc*100))    # ===================s*e====================
    if val_acc > best_acc:
        best_acc = val_acc
        paddle.s*e(model.state_dict(), os.path.join(work_path, 'best_model.pdparams'))
        paddle.s*e(optimizer.state_dict(), os.path.join(work_path, 'best_optimizer.pdopt'))print(best_acc)
paddle.s*e(model.state_dict(), os.path.join(work_path, 'final_model.pdparams'))
paddle.s*e(optimizer.state_dict(), os.path.join(work_path, 'final_optimizer.pdopt'))

【ICLR 2024】MogaNet: 高效多阶门控聚合网络 -

2.7 实验结果

In [25]

def plot_learning_curve(record, title='loss', ylabel='CE Loss'):
    ''' Plot learning curve of your CNN '''
    maxtrain = max(map(float, record['train'][title]))
    maxval = max(map(float, record['val'][title]))
    ymax = max(maxtrain, maxval) * 1.1
    mintrain = min(map(float, record['train'][title]))
    minval = min(map(float, record['val'][title]))
    ymin = min(mintrain, minval) * 0.9

    total_steps = len(record['train'][title])
    x_1 = list(map(int, record['train']['iter']))
    x_2 = list(map(int, record['val']['iter']))
    figure(figsize=(10, 6))
    plt.plot(x_1, record['train'][title], c='tab:red', label='train')
    plt.plot(x_2, record['val'][title], c='tab:cyan', label='val')
    plt.ylim(ymin, ymax)
    plt.xlabel('Training steps')
    plt.ylabel(ylabel)
    plt.title('Learning curve of {}'.format(title))
    plt.legend()
    plt.show()

In [26]

plot_learning_curve(loss_record, title='loss', ylabel='CE Loss')

<Figure size 1000x600 with 1 Axes>

In [27]

plot_learning_curve(acc_record, title='acc', ylabel='Accuracy')

<Figure size 1000x600 with 1 Axes>

In [28]

import time
work_path = 'work/model'model = MogaNet(arch='xt', num_classes=10)
model_state_dict = paddle.load(os.path.join(work_path, 'best_model.pdparams'))
model.set_state_dict(model_state_dict)
model.eval()
aa = time.time()for batch_id, data in enumerate(val_loader):

    x_data, y_data = data
    labels = paddle.unsqueeze(y_data, axis=1)    with paddle.no_grad():
        logits = model(x_data)
bb = time.time()print("Throughout:{}".format(int(len(val_dataset)//(bb - aa))))

Throughout:707

In [29]

def get_cifar10_labels(labels):
    """返回CIFAR10数据集的文本标签。"""
    text_labels = [        'airplane', 'automobile', 'bird', 'cat', 'deer', 'dog', 'frog',        'horse', 'ship', 'truck']    return [text_labels[int(i)] for i in labels]

In [30]

def show_images(imgs, num_rows, num_cols, pred=None, gt=None, scale=1.5):
    """Plot a list of images."""
    figsize = (num_cols * scale, num_rows * scale)
    _, axes = plt.subplots(num_rows, num_cols, figsize=figsize)
    axes = axes.flatten()    for i, (ax, img) in enumerate(zip(axes, imgs)):        if paddle.is_tensor(img):
            ax.imshow(img.numpy())        else:
            ax.imshow(img)
        ax.axes.get_xaxis().set_visible(False)
        ax.axes.get_yaxis().set_visible(False)        if pred or gt:
            ax.set_title("pt: " + pred[i] + "\ngt: " + gt[i])    return axes

In [31]

work_path = 'work/model'X, y = next(iter(DataLoader(val_dataset, batch_size=18)))
model = MogaNet(arch='xt', num_classes=10)
model_state_dict = paddle.load(os.path.join(work_path, 'best_model.pdparams'))
model.set_state_dict(model_state_dict)
model.eval()
logits = model(X)
y_pred = paddle.argmax(logits, -1)
X = paddle.transpose(X, [0, 2, 3, 1])
axes = show_images(X.reshape((18, 224, 224, 3)), 1, 18, pred=get_cifar10_labels(y_pred), gt=get_cifar10_labels(y))
plt.show()

Clipping input data to the valid range for imshow with RGB data ([0..1] for floats or [0..255] for integers).
Clipping input data to the valid range for imshow with RGB data ([0..1] for floats or [0..255] for integers).
Clipping input data to the valid range for imshow with RGB data ([0..1] for floats or [0..255] for integers).
Clipping input data to the valid range for imshow with RGB data ([0..1] for floats or [0..255] for integers).
Clipping input data to the valid range for imshow with RGB data ([0..1] for floats or [0..255] for integers).
Clipping input data to the valid range for imshow with RGB data ([0..1] for floats or [0..255] for integers).
Clipping input data to the valid range for imshow with RGB data ([0..1] for floats or [0..255] for integers).
Clipping input data to the valid range for imshow with RGB data ([0..1] for floats or [0..255] for integers).
Clipping input data to the valid range for imshow with RGB data ([0..1] for floats or [0..255] for integers).
Clipping input data to the valid range for imshow with RGB data ([0..1] for floats or [0..255] for integers).
Clipping input data to the valid range for imshow with RGB data ([0..1] for floats or [0..255] for integers).
Clipping input data to the valid range for imshow with RGB data ([0..1] for floats or [0..255] for integers).
Clipping input data to the valid range for imshow with RGB data ([0..1] for floats or [0..255] for integers).
Clipping input data to the valid range for imshow with RGB data ([0..1] for floats or [0..255] for integers).
Clipping input data to the valid range for imshow with RGB data ([0..1] for floats or [0..255] for integers).
Clipping input data to the valid range for imshow with RGB data ([0..1] for floats or [0..255] for integers).
Clipping input data to the valid range for imshow with RGB data ([0..1] for floats or [0..255] for integers).
Clipping input data to the valid range for imshow with RGB data ([0..1] for floats or [0..255] for integers).

<Figure size 2700x150 with 18 Axes>

In [ ]

!pip install interpretdl

In [33]

import interpretdl as it

In [34]

work_path = 'work/model'model = MogaNet(arch='xt', num_classes=10)
model_state_dict = paddle.load(os.path.join(work_path, 'best_model.pdparams'))
model.set_state_dict(model_state_dict)

In [35]

X, y = next(iter(DataLoader(val_dataset, batch_size=18)))
lime = it.LIMECVInterpreter(model)

In [36]

lime_weights = lime.interpret(X.numpy()[3], interpret_class=y.numpy()[3], batch_size=100, num_samples=10000, visual=True)

100%|██████████| 10000/10000 [00:56<00:00, 176.50it/s]

<Figure size 640x480 with 1 Axes>

以上就是【ICLR 2025】MogaNet: 高效多阶门控聚合网络的详细内容，更多请关注其它相关文章！

# python # git # ai # cos # red # igs # latte # fig # type # coco # 门控 # 中文网 # 提出了 # 一言 # 所示 # 官网 # 进行了 # 的是 # 多个 # 并在 # 辽宁常见营销推广操作 # 宝山seo优化学习 # 松原seo推广软件 # 企业营销活动推广策略 # 360推广营销战团 # 佛山外贸网站建设策略 # 高仿外贸推广网站怎么做 # 甘肃seo查询快速入门 # 东莞网站设计制作推广 # 中国网站推广招商加盟